AGL Buyers Guide

Digital Advertising Gets You Closer to Your Customers

Selected Product Showcase (24) 

  • Multi-GNSS L1/L2/L5 Precision Antennas for Navigation and Timing
    PCTEL, Inc.

    The GNSS-L125-TNC multi-GNSS high performance antenna combines aerospace-level precision with global satellite compatibility, in a highly durable package. It supports all relevant GPS, GLONASS, BeiDou, and Galileo frequencies with excellent multipath mitigation and high out-of-band rejection for greater signal clarity. The antenna’s robust AAR and IP67-compliant design makes it suitable for years of use on railways and in other harsh real-world environments.

    Also available in a high 40 dB gain model (GNSS-L125-40TNC), ideal for waysides and rolling stock over long runs. https://www.pctel.com/antenna-product/multi-gnss-l1-l2-l5-precision-antenna-high-gain-gnss-l125-40tnc/

    Both models come with a 5-year warranty.

    • 5G Timing Synchronization
    • PTC Rolling Stock Tracking
    • Military Vehicle Tracking & Asset Tracking
    • Precision Agriculture
    • Differential Correction

    Multi-GNSS L1/L2/L5 Precision Antennas f...
  • Coach™ II Multi-Band Antenna
    PCTEL, Inc.

    The Coach™ II antenna is equipped with nine antenna ports, including four multi-band LTE ports for dual-carrier operation and four dual-band Wi-Fi connections. It is designed to support the latest multi-network routers for intelligent transportation systems, public safety communications, and the Industrial Internet of Things (IIoT). It also features PCTEL’s proprietary high rejection GNSS technology for reliable, precision tracking and timing over GPS, GLONASS, QZSS, Galileo, and BeiDou satellite systems. With a 33% lower profile than its first-generation version, the new Coach II is ideal for mounting on vehicles with low overhead clearance, or on IIoT locations with limited installation height allowances. This product can be ordered via part number GL9X1AX-SF.
    Key Features:
    • Multi-band coverage of 4G LTE frequencies: 600-960/1710-2700 MHz with 4 connection ports
    • 4-Port 802.11ac MIMO coverage of Wi-Fi frequencies: 2.4-2.5/4.9-5.9 GHz

    Coach™ II Multi-Band Antenna
  • Trooper™ II – Slender Dual Carrier Multi-Band Antenna for Public Safety FirstNet Networks
    PCTEL, Inc.

    PCTEL’s Trooper™ II next generation multi-band antenna provides optimal wireless communications performance through its 4-port 4G LTE connections, and 4x4 802.11ac Wi-Fi MIMO capability. The new model enhances PCTEL’s already successful Trooper™ platform, with expanded multi-band RF and GNSS capability designed to interface with the leading dual carrier, multi-spectrum routers on the marketplace. Featuring PCTEL’s newest high rejection multi-GNSS technology that supports GPS L1, GLONASS and Galileo, this antenna delivers high precision location tracking for secure mission critical applications and fleet management support.
    The rugged Trooper™ II is exceptionally versatile and easy to install. Its slender footprint and single cable exit accommodate installation restrictions often encountered on modern public safety vehicles. Its robust, aerodynamic housing design is available in black sold under (part number GL9X1AX-TRB) or white (part num...

    Trooper™ II – Slender Dual Carrier M...
  • Low-Profile Antennas - Hush™ Glass Mount Covert Antenna
    PCTEL, Inc.

    The new Hush™ 2.4/5 GHz Bluetooth/Wi-Fi tape mount antenna. Light, compact, and rated for both indoor and outdoor use, PCTEL’s Hush antennas are ideal for both covert public safety and industrial IoT applications. With their durable overmolded design and ultra-compact footprint, Hush antennas can be tape mounted almost anywhere, including vehicle windows, factory floors, officer vests, backpacks, and utility cabinets. Hush antennas are designed to make it easier to deploy smart automation systems, especially in harsh industrial environments that have limited space for antennas.
    Key Features:
    • Wideband operation (no field tuning required)
    • IP67 rated, overmolded design suitable for outdoor installations
    • Glass mount installation, inside or outside the vehicle
    • Low-profile design for covert applications

    Low-Profile Antennas - Hush™ Glass Mou...
  • PCTEL’s HBflex™, IBflex®, and MXflex® Scanning Receivers
    PCTEL, Inc.

    PCTEL’s HBflex™, IBflex®, and MXflex® scanning receivers are precision RF testing tools. They are used to verify and improve the performance of wireless networks worldwide, including 5G NR, LTE, and public safety technologies. PCTEL scanning receivers support a variety of network engineering activities, including spectrum clearing, baseline testing, model tuning, network planning, network commissioning, acceptance testing, competitive benchmarking, troubleshooting, and network optimization. They integrate easily with third-party software and are supported by PCTEL’s own Engage™, SeeHawk®, and SeeWave® tools.
    Key Features:
    • 5G NR and LTE-LAA measurements (HBflex™ and IBflex®)
    • LTE, NB-IoT, public safety, and LTE-M measurements
    • Wide mmWave (HBflex) and sub-6 GHz (all) band range
    • Field-upgradeable software-defined radio (SDR) architecture
    • Simultaneous testing on multiple technolog...

    PCTEL’s HBflex™, IBflex®, and MXfle...
  • 900 MHz MIMO Yagi Antennas for Utilities and Industrial IoT
    PCTEL, Inc.

    PCTEL’s MIMO Yagi antennas are designed to work seamlessly with the latest narrowband radios under demanding real-world conditions. Their high port-to-port isolation mitigates interference for optimal MIMO or diversity performance. The antennas’ robust mechanical design can withstand heavy ice, high wind and other harsh conditions. They are manufactured using high strength 6061-T6 aluminum and anodized for aesthetic appearance and corrosion resistance. In addition to the new 900 MHz model, MIMO Yagi antennas are available for 700 MHz and 800 MHz spectrum.

    900 MHz MIMO Yagi Antennas for Utilities...
  • Public Safety and Critical Communications

    There are many challenges faced by Public Safety networks. Their coverage and capacity are limited by buildings’ physical characteristics, interoperability with other wireless networks, mobile radio technology used (e.g., FMN, OpenSky, TETRA and APCO P25), and overall Passive Intermodulation (PIM) performance. Microlab offers a wide variety of reliable RF passive components suited for in-building wireless communication for emergency service personnel. Our trusted products help provide full coverage and increase capacity across independent and/or coexistent mobile radio and cellular networks.

    Public Safety and Critical Communication...
  • Low PIM Terminations/Loads

    Microlab offers 698 – 2700 MHz low PIM terminations from 5W to 200W in convenient moisture sealed packages, similar to those used in conventional resistive attenuators and loads. A frequent application is terminating the load port of a hybrid combiner when adding two RF signals at a radio base station, so an integrated package of hybrid and low PIM load is also offered.

    Low PIM Terminations/Loads
  • Directional Couplers

    Directional couplers provide flat coupling of one signal path to another in one direction only (known as directivity) and low VSWR over one full octave or more. They commonly consist of an auxiliary line coupling electrically to a main line, which becomes more complex as the bandwidth increases. One end of the auxiliary line is permanently fitted with a matched termination. Directivity (the difference between coupling in one direction compared to the other) is approximately 20 dB for printed couplers, 25 dB or more for air-dielectric couplers. Directional couplers are used whenever part of a signal needs to be separated off or two signals need to be combined. Microlab offers narrow band and wireless band directional couplers with coupling ranging from 3 dB to 50 dB or more, always reference to the input port.

    Directional Couplers
  • Wilkinson power Splitters

    Wilkinson dividers/splitters offered in 2, 3, 4, 6 and 8 ways are most commonly designed on microstrip boards in convenient packaging. They have outputs which are isolated by 20 dB or more, but are generally limited to low power applications because the resistors used in such designs are usually less than 1W. The resistors also cause poor PIM performance so Wilkinson dividers/splitters should not be used when low PIM is a requirement. Microlab offers wireless designs with bands extending from Tetra and P-25 frequencies to 6 GHz.

    Wilkinson power Splitters
  • Reactive Power Splitters

    Reactive splitters offered in 2, 3, 4, and 6 ways, use air-line dielectrics with silver plated, metal conductors in aluminum housings. They have excellent input VSWR, high power ratings, low PIM and very low losses usually 0.05 dB or less. Modern design techniques allow bandwidths that extend from 380 to 4200 MHz in housing of convenient length. Reactive splitters are frequently employed in in-building systems because they are virtually indestructible, low loss and low PIM.

    Available with in-line or opposed connectors.

    Reactive Power Splitters
  • DC Blocks

    Microlab DC Blocks are used to prevent the flow of direct current and low frequency current surges along the inner and/or the outer conductors of a transmission line, while permitting the unimpeded flow of RF signals. Applications include the blocking of current surges that can occur in subway tunnels and rail systems, at base-station/cell-sites during lightening storms, to route DC to tower mounted amplifiers (TMA’s) or whenever DC isolation is required. Units are available with a DC block on the inner and/or outer conductor, and all units are built with special attention to effects of PIM.

    DC Blocks
  • In-Building Antennas

    These low cost antennas are popular for propagating in-building wireless signals in distributed antenna systems, (DAS).  They are available in SISO or MIMO, Omni or directional, and celing mount or panel mount configurations.

    In-Building Antennas
  • MCC Series - Modular POI

    Microlab’s MCC™ series Point of Interface (POI) is a Passive Modular Carrier Combiner for Neutral Host Small Cell and D-RAN Architectures. It helps combine RAN remote heads for RF distribution. It has been designed to provide up to 4 Operators SISO configurations for 2 sectors OR up to 4 Operator MIMO for 1 sector. The MCC allows many configurations to support multi-carrier and multi-band Neutral Host MIMO or SISO applications. The design has been optimized for low-loss in a modular enclosure that is compatible with standard 19” Racks. It is passively cooled, so no external power or fans are required.  Both indoor and outdoor models are available.

    MCC Series - Modular POI
  • Lossless GPS Signal Splitter

    Microlab’s Lossless GPS Signal Splitters can be used to distribute UTC synchronization to up to 32 remote units using only 2 redundant GPS antenna signals. The GPS signal quality is actively monitored by this system and can be combined with the Microlab Digital GPS Signal Repeater where GPS signals are not readily available. 16-channel and 32-channel options are available with up to +10dB selectable gain. Designed to be used in combination with Microlab’s Digital GPS repeater system. See also Digital SkyTiming Technology™

    Lossless GPS Signal Splitter
  • Digital GPS Repeater

    Microlab’s digital GPS repeater system can be used for cellular communications UTC synchronization for locations where the GPS signals are not readily available. The system is built with Microlab’s patent-pending Digital SkyTiming Technology™ offering industry-first GPS signal transmission via CPRI for highly accurate timing and location.

    The system offers several configurations for indoor and outdoor applications. Designed to be used in combination with Microlab’s Lossless GPS Signal Splitters.

    Digital GPS Repeater
  • Custom Integrated Assemblies

    Microlab offers custom solutions for In-Building Distributed Antenna Systems (DAS) and D-RAN. Available bands range from 136 MHz to 6GHz, including public service channels and Tetra in the range from 80 to 520 MHz, cellular services extending from LTE 600 to LTE-LAA at 6GHz.

    Microlab’s broad range of catalog components allow rapid creation of special configurations to suit customer needs, whether in-building, on trains, in tunnels, or outdoors.

    To simplify ordering, Microlab offers a variety of standard DAS Carrier Conditioner (DCC) designs, for example 4 low band and 4 high band inputs combined to 4 identical outputs. Our designs come with very low loss specifications, greatly simplifying the task of optimizing the loss budget.

    Microlab's DCC Series® also offers DAS Carrier Conditioners for outdoor deployments. All internal modules are embedded in a NEMA 4 / IP 66 rated enclosure. This ensures the integrity of the RF performance even under harsh envir...

    Custom Integrated Assemblies
  • Low PIM Jumper Cables

    Whether macro cells or in Building DAS venues, the wrong RF cable can have a devastating influence on network reliability and quality of service. Passive intermodulation (PIM) is often thought “negligible” at in-building DAS venues, but this is not the case. The front end of a DAS Carrier Combiner interface is particularly susceptible to PIM interference. High power levels are attenuated and combined at this stage. If PIM levels are not minimized the system’s overall performance is reduced significantly. Our new J-cables are especially designed with these requirements in mind. They are 100% tested to guarantee the best system performance.

    Microlab Model JA and JB series, Coaxial Jumper Cables are built for consistent low PIM performance. Designed for use in all systems where low PIM and excellent electrical performance and mechanical reliability are paramount. With an operating range of DC to 6 GHz, these cables are ideal for all telecommunication applicatio...

    Low PIM Jumper Cables
  • Ultra-compact PCS/AWS Dual Diplexer, BK-747E

    Microlab BK-747E is a dual Diplexer which allows combination and separation of the signals in the PCS band 1850 - 1995 MHz with the AWS-WCS bands 1695 - 1780 MHz and 2110 - 2360 MHz. To minimize band inter-reaction, the inputs are well isolated and have minimal insertion loss over their respective frequency bands.

    The Diplexer has been designed using passive, proprietary techniques which minimizes cost and size. At the same time it ensures minimal loss and very high reliability at input powers up to 20W per input.

    Double unit mounting configurations for Quad Diplexer applications are available as Microlab Model BK-747EW (quad-stack) & BK-747EX (side-side)

    Ultra-compact PCS/AWS Dual Diplexer, BK-...
  • SmartCoupler

    SmartCoupler is the world’s first Radio Frequency coupler with embedded signal monitoring intelligence. SmartCoupler capitalizes on the Internet of Things ecosystem to monitor the integrity of transmission lines and antennas, deep into a building for emergency communications systems.

  • PCS/AWS Dual Diplexer, BK-745E


    Microlab BK-745 is a dual Diplexer which allows combination and separation of the signals in the PCS band 1850 - 1990 MHz with the AWS-WCS bands 1695 - 1780 MHz and 2110 - 2360 MHz. To minimize band inter-reaction, the inputs are well isolated and have minimal insertion loss over their respective frequency bands.

    The Diplexer has been designed using passive, proprietary techniques which minimizes cost and size. At the same time it ensures minimal loss and very high reliability at input powers up to 100W per input.

    PCS/AWS Dual Diplexer, BK-745E
  • Low PIM Attenuators

    Microlab FY Series is a low PIM, unidirectional Attenuator, using a multi section, quarter wave, stripline coupler with a low PIM cable load. It is designed for indoor applications covering all wireless bands from 694 to 2,700 MHz. This model couples off a portion of the input power to the output. This achieves a flat attenuation response over a wide frequency range, 617-2700MHz.
    The wide frequency range allows use with multiband antennas and leaky cable systems and in wireless base stations. With minimal solder joints and an air dielectric, the dissipative loss has been minimized and reliability enhanced.

    Low PIM Attenuators
  • Low PIM Tappers

    Microlab Tappers unevenly split high power cellular signals in fixed ratios from 1000:1 to 2:1 with minimal reflections or loss over the key wireless bands in the range 350 - 5,930 MHz, (there is no coupling 1550 to 1650 MHz). The innovative asymmetric design ensures an excellent input VSWR and coupling flatness across the specified bands, even down to a 2:1 split.

    The lightweight design allows easy attachment to a wall using the supplied bracket. Designed with only a few solder joints and an air dielectric, loss is minimized and reliability enhanced.

    Available in 7/16 DIN, N, and 4.3-10 connectors.

    Low PIM Tappers
  • Hybrid Couplers/Combiners

    Hybrid Couplers have the important characteristic that allows addition of two or more signals without interaction regardless of how close the frequencies of the signals may be. This feature can often eliminate the need for filters which can often introduce signal aberrations. Microlab’s Hybrid Couplers have ultra wide bandwidths, very low PIM and minimal loss. The most commonly recommended hybrid for wireless systems is a multisection, stripline design, covering 700 MHz to 2700 MHz, which includes the present and future cellular, PCS, 3G and 3G/4G extension bands. Other units extend frequency coverage with flat response from 350 MHz to 6000 MHz, but at the cost of greater size and weight.

    Microlab has models specifically designed for use in harsh outdoor environments.

    Microlab's hybrid's offer the highest isolation in the industry, and are offered in :

    Standard bandwidth 617-2700MHZ.

    Ultra-wideband 350-5925MHz.


    Hybrid Couplers/Combiners

Narrow Your Search